Skip to main content

15 posts tagged with "Article"

Resource type: peer-reviewed papers and extended abstracts

View All Tags

Determinism: from the OSI and TCP/IP Ethernet stack to TSN

· 11 min read
PhD candidate, LyRIDS (ECE) × CEDRIC (Cnam)

A control loop on a factory floor and an e-mail server can share the same cable only if the network can promise the first one something the second never needs: that every packet arrives on time. This post starts from the ordinary Ethernet and TCP/IP stack, shows where its timing breaks down, and explains how Time-Sensitive Networking (TSN) extends it without replacing it.

Why deterministic guarantees? From TSN to worst-case bounds

· 7 min read
PhD candidate, LyRIDS (ECE) × CEDRIC (Cnam)

Time-Sensitive Networking (TSN) promises that a standard Ethernet network can carry control traffic with bounded latency. This first post explains what "bounded" means, why it cannot be established by measurement alone, and why deterministic network calculus is the analytical tool of choice for establishing it.

Dynamic reconfiguration of TSN: where network calculus fits

· 7 min read
PhD candidate, LyRIDS (ECE) × CEDRIC (Cnam)

The guarantees developed in this series are established for a fixed configuration. This final post examines what happens when the configuration changes at run time, through two recent contributions, and argues that network calculus is the natural tool to certify a reconfiguration, whatever method proposes it.

IEEE 802.1Qbu: frame preemption in the bridge

· 6 min read
PhD candidate, LyRIDS (ECE) × CEDRIC (Cnam)

A long frame already on the wire delays everything behind it: a 1522-byte frame occupies a 1 Gbit/s link for about 12 µs. IEEE 802.3br gave Ethernet the means to cut such a frame. IEEE 802.1Qbu decides, inside the bridge, which frames may cut which, and coordinates the cut with the gates of scheduled traffic.

IEEE 802.1Qcr ATS: asynchronous traffic shaping without a clock

· 7 min read
PhD candidate, LyRIDS (ECE) × CEDRIC (Cnam)

Class-based shapers let the bursts of a stream grow from hop to hop, and scheduled traffic needs a network-wide clock and a central schedule. Asynchronous Traffic Shaping (ATS) avoids both problems: it restores each stream's original traffic contract at every hop, using only the bridge's local clock.

IEEE 802.1Qat, 802.1Qcc and P802.1DD: stream reservation and admission control

· 7 min read
PhD candidate, LyRIDS (ECE) × CEDRIC (Cnam)

A shaper bounds latency only if the traffic it serves stays within what it was configured for. Something must therefore decide, before a stream starts, whether the network can carry it. This post covers the distributed way of making that decision, in which the bridges themselves admit or reject streams. The centralised alternative is covered in the SDN post.

IEEE 802.1Qcc and SDN: the CNC as a software-defined controller

· 7 min read
PhD candidate, LyRIDS (ECE) × CEDRIC (Cnam)

TSN gives every bridge gates, shapers, filters and redundancy. Something still has to decide how all of them are set, in a consistent way, across the whole network. In most TSN deployments that is a central controller, and the architecture it fits into is software-defined networking (SDN).